Tune in on Sunday for....

[ratssass]

well, you're on the road to recovery, now.....good luck!

 

[Torque Command]

The few times I've built an engine I could spin the crank over by hand when there was only assembly lube.

Always thought it was neat that something so heavy could spin so effortlessly like it was floating (and I guess it was).

 

[350LUV]

Holy fuck….. that builder (and I say that with a truckload of sarcasm) obviously never even stuck a thread of plastigage on the mains… it would have been smashed flat if he did …

You got lucky it didn’t grab hold of the crank and spin the bearing… I hope the mains are straight and the crank checks out good, should be a straightforward build from this point out..

Good luck with the build !

 

[RacinDuallie]

When applying torque to a factory torque to yield thread bolt, what is the number 1 enemy to friction which happens to the threads as torque is applied? Just asking.

Pfff. Gave up?

Lots of secrets learned. You would be surprised

TikTok - Make Your Day

www.tiktok.com

 

[RacinDuallie]

I'm assuming is friction that causes the bolt to turn further after broken loose and retorqued.

 

[wickSS]

Pfff. Gave up?

Lots of secrets learned. You would be surprised

TikTok - Make Your Day

www.tiktok.com

They aren’t TTY you fucking food cooking idiot. When is your “lifetime network” premiere on proper glazing for hot dogs?

 

[RacinDuallie]

They aren’t TTY you fucking food cooking idiot. When is your “lifetime network” premiere on proper glazing for hot dogs?

For the record- you had me at glazing- and I imagined doughnuts- not hot dogs.



But yew do yew !

 

[RacinDuallie]

They aren’t TTY you fucking food cooking idiot. When is your “lifetime network” premiere on proper glazing for hot dogs?

Excuse me but factory Cummins head bolts are infact tty..... hate to break it to ya. But I have a special proceedure- been proven too. Truck ran hi 9's/quarter with factory head bolts. Big cylinder psi too. Changed owners and still rocking hi 9's with the special tq. method.

 

[wickSS]

Excuse me but factory Cummins head bolts are infact tty..... hate to break it to ya. But I have a special proceedure- been proven too. Truck ran hi 9's/quarter with factory head bolts. Big cylinder psi too. Changed owners and still rocking hi 9's with the special tq. method.

I don’t know what cock you’re Smokin here but this is definitely NOT a thread with even one teeny concern for a Cummins!!!

You must hit the reset button and find your way home. Again.

 

[wickSS]

For the record- you had me at glazing- and I imagined doughnuts- not hot dogs.



But yew do yew !

Oh, and I’ll say could really go for some really good donuts!! Jesus!! It’s been years!!

 

[Lowrider]

What are we working on here, a SBF or a 6bt, I lost track.

 

[RacinDuallie]

I don’t know what cock you’re Smokin here but this is definitely NOT a thread with even one teeny concern for a Cummins!!!

You must hit the reset button and find your way home. Again.

I thought I was conversing in this thread with another member.

 

[CompNut]

Maybe it's time to step up to the fabled 351 Cleveland? That could be waaaayyy too much for Fox to handle though.

 

[RacinDuallie]

What are we working on here, a SBF or a 6bt, I lost track.

Thread can fucking be derailed.

 

[wickSS]

What are we working on here, a SBF or a 6bt, I lost track.

You gotta ask that fucking moron.

 

[wickSS]

I thought I was conversing in this thread with another member.

About what? Your garage dweller?

You made me hungry for real donuts. For that, you are an asshole.

 

[RacinDuallie]

About what? Your garage dweller?

You made me hungry for real donuts. For that, you are an asshole.

Paczki's

 

[CompNut]

There's some real work being done on the Ford, not so much on the Toob Truck.

What are we working on here, a SBF or a 6bt, I lost track.

 

[wickSS]

Do you have any fucking idea how hard it is to get real donuts around here? You have to go and bring that shit yo and now I want them.

Guess I’ll be on a field trip tomorrow getting myself some real donuts!!!

Which I really can’t have either.

 

[CompNut]

Paczki's

There's a local grocery chain here that has those once in awhile, they sure are tasty. Had some a month or so ago.