Leak down test after spewing water at the track

I ordered this Meziere Remote Electric Water Pump WP116SHD but haven't got it yet. I'm on alcohol starting out and really don't need it for cooling just racing but I plan to put it on gas at some point just to play around and see if its drivable. I really want to be able to switch back and forth so I can do some small cruises.
mez-wp116shd_w.jpg
 
Last edited:
After doing some research the only problem I see for my application is that the 300 series 55 gpm pumps have an 1 3/4 inlet nipple for a standard size radiator hose. I need a 1 inch npt threaded inlet for my -an line. Thinking I may go with the 42 gph one,which is still an upgrade from the standard 35. I think it should work well for my application.I guess the only other option would be to have a large bung welded into the nipple and reduce it down,which will be restrictive defeating the purpose. not really interested in that. Looking at this.
 
After doing some research the only problem I see for my application is that the 300 series 55 gpm pumps have an 1 3/4 inlet nipple for a standard size radiator hose. I need a 1 inch npt threaded inlet for my -an line. Thinking I may go with the 42 gph one,which is still an upgrade from the standard 35. I think it should work well for my application.I guess the only other option would be to have a large bung welded into the nipple and reduce it down,which will be restrictive defeating the purpose. not really interested in that. Looking at this.
I would call Meziere tomorrow to be sure. I know they have adapters that aren’t listed on their site. The nipple screws in, so you can change them.
 
I would call Meziere tomorrow to be sure. I know they have adapters that aren’t listed on their site. The nipple screws in, so you can change them.
It appears looking at the pics of the 300 series pumps that that large inlet nipple is welded on. I was on their website,but will call them.
 
Both of my pumps have a screw-in inlet. Maybe their 300 series pumps are a little different. Of course the inlet that came with each pump was the wrong size and I had to buy two new inlets.
 
Both of my pumps have a screw-in inlet. Maybe their 300 series pumps are a little different. Of course the inlet that came with each pump was the wrong size and I had to buy two new inlets.
I've been down that road before, hell at one time I think I had six or seven different adapter fittings for those pumps. When I did it this time for packaging reasons I got the radiator that had the pump mounted to it with two-12 inlets at the top and two-12 feeds out of the pump at the bottom. We'll see if it's enough radiator, I highly doubt it but their stuff is so efficient that it just may be if I run it on E.
 
It appears looking at the pics of the 300 series pumps that that large inlet nipple is welded on. I was on their website,but will call them.
It should be an O-ring seal. I think I thought the same. Called them and they gave me the PN# I needed.
 
It appears looking at the pics of the 300 series pumps that that large inlet nipple is welded on. I was on their website,but will call them.
I think you are right. That sure as shit looks welded to me. Maybe there is a different PN# for a 55ga.

IMG_7511.jpeg
 
I think you are right. That sure as shit looks welded to me. Maybe there is a different PN# for a 55ga.

IMG_7511.jpeg
I would have lost anything I bet on that one. I would have sworn that was threaded where you could connect whatever outlet style you needed. If I already owned/used this pump Id have my fab guy cut that back a little and tig me a male -16 on there, or whatever size you need.
 
Opt for the largest one you can get, that being the 55 GPM. If it's flowing too much water put a restrictor in but buy once cry once.
 
Opt for the largest one you can get, that being the 55 GPM. If it's flowing too much water put a restrictor in but buy once cry once.
It’s not the money .actually the 55 gpm is only 95 dollars more than the heavy duty 42.Its about finding something that fits my application. Im very limited for room in the pipe rack,and finding someone that could modify it and tig a fitting on here in podunk is not gonna happen.
 
Last edited:
It’s not the money .actually the 55 gpm is only 95 dollars more than the heavy duty 42.Its about finding something that fits my application. Im very limited for room in the pipe rack,and finding someone that could modify it and tig a fitting on here in podunk is not gonna happen.
I don’t think you’ll have any issues with the 42 gpm if the 55gpm now has the fitting welded in.
(mine didn’t & I hadda buy the fitting I wanted).

It will shed heat very quickly with the engine exposed.
 
Back
Top