Vamodsquad
Silver Member
- Joined
- Jan 14, 2021
- Messages
- 2,117
- Reaction score
- 3,817
- Points
- 153
You sure do miss alot when you go to work. This thread grew 3 pages while I was gone !
We run more than that. It will hit 100# during a pass. But it’s an external pump too.What is different in the oiling on ford that they don't like high oil pressure? I was told keep it under 65
Let’s not forget who we are talking about here.Jesus Christ, don't overthink this.
don't be so sure of that ,if you met Fox you would like him.Unlikely to get to the fuckin thing?
Bet 99% here wouldn't miss the sleep they would lose using up an hour to fill it n send it!
DAMN, I KNOW WE WOULD NEVER BE FRIENDS!
Yes!Am I driving the car down the road or just idling it up to temperature. Christ this forum can't make up its mind.
Oh wait, that's just me
I wouldn't drive it 10 miles, I'd change the oil fire it up, let it idle 5 minutes, then from under the hood, give it a few revs listening closely for any knock/rattle, nothing, then do some feathering of the throttle around 2000-2500 listening again, if it still sounds fine, take it for an easy 5 miles, 2 1/2 each way unless he starts hearing knocking then bring it back and cut open the filterAnyone got the over and under on the 10 mile trip?
I use an chain style exhaust pipe cutter that uses the circular blades similar to a tubing cutterDid you cut the filter open? Open the pleats and look in there for metal? I have a couple of oil filter openers that are pretty easy to use and work like a tubing cutter so there is no extra metal added from the cutting process. I cut the filters open on both race cars each time I change the oil. I want to catch something early before it becomes a huge mess.
You have a lot of glitter in that oil, a lot. I have never had that on my stuff. Put some high detergent oil in there and run it for a few minutes to get it up to temp then take the filter off and cut it open.
Nobody joins the A Team without one of these,
Got one!![]()
I wouldn't drive it 10 miles, I'd change the oil fire it up, let it idle 5 minutes, then from under the hood, give it a few revs listening closely for any knock/rattle, nothing, then do some feathering of the throttle around 2000-2500 listening again, if it still sounds fine, take it for an easy 5 miles, 2 1/2 each way unless he starts hearing knocking then bring it back and cut open the filter
I'm sure your correct.don't be so sure of that ,if you met Fox you would like him.
Just me, but if I'm actually hearing knocking, that engine is coming out. No further investigation from the outside. Take care. Tom Worthington
That's pretty much what I was saying, if it sounds fine, take er for a ride, just a short, easy oneJust me, but if I'm actually hearing knocking, that engine is coming out. No further investigation from the outside. Take care. Tom Worthington