BOSS#1540
Silver Member
I should say the intake runners went from 241cc up to 265cc after darins porting and he modified the chamber slightly
My A3's flowed 341cfm with me barely smoothing the machining marks in the bowl, but didn't have proper dimensions. Darin got them to 399.7 cfm along with the proper dimensions.
By stock I meant unported. These weren't offered on a passenger vehicle, they're the aluminum Cleveland head, basically a copy of the raised exhaust port PS head of the early 70's
I figured fox should be around my level with probably more tq to be honest.
Yeah, same here, I'd like to understand cams better, learned some, but I'll leave selection up to jones, lol. Really looking forward the one he made me for the xe.That seems reasonable.
I was also a little surprised that Mike Jones said 550 HP with the cam that's close to the cam Fox has.
I'll guess the CI, CR, and cam aren't enough to support the "HP = CFM x 2" idea, but 550 sounds a bit low.
What really surprises me is the fact the more I learn, the less I know.![]()
Sell the 185's and put some 220s on it.That's my point.
If mph shows hp. And hp and weight determine your likely best ET possible.
Then my car has no where near the power I wanted, expected, or was sold on. Therefore will not have the ET either.
I don't know what head Brian is running on this engine. I have AFR210's on our slow car which goes 10.3 @ 128 @ 3400lbs.Sell the 185's and put some 220s on it.
I thought he had TFS R'sI don't know what head Brian is running on this engine. I have AFR210's on our slow car which goes 10.3 @ 128 @ 3400lbs.
The AFR220's and AFR227's are nice heads.
Everything they make is nice.I don't know what head Brian is running on this engine. I have AFR210's on our slow car which goes 10.3 @ 128 @ 3400lbs.
The AFR220's and AFR227's are nice heads.
I am actually thinking Brian has Promax heads, but I can certainly be wrong.I thought he had TFS R's
My A3's flowed 341cfm with me barely smoothing the machining marks in the bowl, but didn't have proper dimensions. Darin got them to 399.7 cfm along with the proper dimensions.
By stock I meant unported. These weren't offered on a passenger vehicle, they're the aluminum Cleveland head, basically a copy of the raised exhaust port PS head of the early 70's
I figured fox should be around my level with probably more tq to be honest.