Mike Beck
Gold Member
- Joined
- Jul 20, 2021
- Messages
- 9,602
- Reaction score
- 19,415
- Points
- 153
And don't try for the "perfect" timing mark on the straps! Especially if you run Autolites, they only have half a strap to begin with.
Get the A/F close, again, for you, 13.0 to 13.3 A/F should be pretty close. Go down towards 12.5 and up to 13.8 once you have a handle on things.
Timing, well it's a SBF and they typically don't need much timing unlike our SBC with large domes.
Add 2 at a time till the MPH drops off. That's your limit. I can't see it needing more than 38*, and probably far less!
What did your engine builder want you to start with?
Maybe 28* to 30*?
I'm not a SBF guy so I would have to phone a friend for solid advice.
Get the A/F close, again, for you, 13.0 to 13.3 A/F should be pretty close. Go down towards 12.5 and up to 13.8 once you have a handle on things.
Timing, well it's a SBF and they typically don't need much timing unlike our SBC with large domes.
Add 2 at a time till the MPH drops off. That's your limit. I can't see it needing more than 38*, and probably far less!
What did your engine builder want you to start with?
Maybe 28* to 30*?
I'm not a SBF guy so I would have to phone a friend for solid advice.














