Foxy Green Foxbody Build

I didn't even think about it before, but jacking up the rear of the car more than the front to lessen the angle can help.

(I tend to only remember things when I'm working on stuff)
 
Steve439 said:
I didn't even think about it before, but jacking up the rear of the car more than the front to lessen the angle can help.

(I tend to only remember things when I'm working on stuff)
Click to expand...
I did this, but it was only a few inches. Didn't make me feel tingly about the jack stands even though it probably doesn't matter
 
but, but, but.....the tow vehicle!!
 
Fox turn your bad luck around by wishing i win the powerball jackpot soon (at least 500mil in hand) and you can come work for me in Florida doing all the chores i won't be bothered doing. Just don't get close to Sydney or i might murder you and don't steal from me. Other than that have a ball
Click to expand...

Dude... get your act together.
Put him up in the caretaker's house with the hot Cuban maid and everybody will be happy.
 
I don't know where the discrepancy is, because the solid motor mounts and the poly ones look and measure the same, but the engine is sitting way higher. I'll have to cut an estimated 11/16" out of them. And no, I can't add a spacer to the kmember as you guys always suggest.

Welcome to car building. Again.
 
89 Fox 427 said:
I don't know where the discrepancy is, because the solid motor mounts and the poly ones look and measure the same, but the engine is sitting way higher. I'll have to cut an estimated 11/16" out of them. And no, I can't add a spacer to the kmember as you guys always suggest.

Welcome to car building. Again.
Click to expand...
No way of making poly mounts fit ?
 
Ho
Lee
Shit

20 year revelation. I installed my offset steering rack bushings when Bush was in office. I have a bumpsteer kit, so the offset isn't needed. Actually, I'm thinking I can reverse the offset, lowering the rack, allowing me to drop the engine 1 inch lower, as the rack to oil pan was the main reason I couldn't.

Hood clearance. Please, let the steering arm, and headers still clear everything.

Pray for me.
 
I
89 Fox 427 said:
Ho
Lee
Shit

20 year revelation. I installed my offset steering rack bushings when Bush was in office. I have a bumpsteer kit, so the offset isn't needed. Actually, I'm thinking I can reverse the offset, lowering the rack, allowing me to drop the engine 1 inch lower, as the rack to oil pan was the main reason I couldn't.

Hood clearance. Please, let the steering arm, and headers still clear everything.

Pray for me.
Click to expand...
I think I have a brand new set of stock location poly bushings in my stash
 
You must log in or register to reply here.
Back
Top