Breaking up at high rpm, carb issues, and converter issues.

i think he was referencing jetting
well i took it as he was.
but im part pollack so you cant always trust what im thinking
That's what I meant, I usually try not to overcomplicate posts because the ADHD on my end and everyone else here runs rampant at times.
 
First pass I had to abort. I’ll explain lter

pass#2 with BLP original jetting .106/.118 and 28* timing.

5.95 @ 115.06 mph 1.30 60’ spinning.
Engine still missing up too, but not as bad.

AFR 11.5 all the way down the track.
 
Drop down the jets, but not back to previous. 2 sizes front and rear should help. What's the timing?
 
take out .008-.010
probably need more but a good starting point
and at some point id throw the power valve as far away as you can get it and square jet...lol
its a variable
the math is
afr you have / afr you want
so
11.5/12.5
a carb doest work quite as well as efi, but that gets you in the neighborhood
 
DA is around 2300 there right now, may need 3 sizes. I thought the air was worse.
 
i think he was referencing jetting
well i took it as he was.
but im part pollack so you cant always trust what im thinking
Come to think of it, I haven't heard a good Pollock joke in years...What's up with that ?
 
I wonder if it would be a good idea to lower the nose of that car and put a chin spoiler on it ??
 
Alright all,

Today was a great day! Imagine having a goal in mind for the past 12 years and finally making it happen. I thank everyone that has helped me along the way. It means so much to me, some really great people have given me advice and I really appreciate it.

My wife and two boys were with me, my best friend and his wife that live in Arizona, and a really good friend and his wife that I met at the track last year.

After that first real pass, I bumped timing to 30* and the car picked up .6 mph, but AFR was still very fat @ 11.5.
I left timing alone and kept taking out jet on every pass. I no shit ran the fastest time with the jets exactly where I was at last week!!!!

I ran a total of 7 passes. First one I aborted because I had the rev limiter chips in the wrong slot. :facepalm:

Here are the passes in order, not counting the aborted one.

1. 5.95 @ 115.06 1.309 60’ (28* timing)
2. 5.92 @ 115.65. 1.305 60’ (30* from here on)
3. 9.79 @ 55.46 1.304 60’ (This run was aborted due to car lifting the wheels and pulling left. I went back to the pits and went two clicks on front strut extension.)
4. 5.88 @ 117.11 1.310 60’ (spun a little)
5. 5.85 @ 117.46 1.309 60’
6. 5.83 @ 118.19. 1.305 60’ (9.42 @ 115 😊)
 
Great job brother. Do you have travel limiters on the front suspension yet?
 
Great job brother. Do you have travel limiters on the front suspension yet?
THANKS!
No, but other than the 2 clicks today on the front struts I have not touched anything yet. I think the car has too much anti-squat (130%). I can make a bar adjustment and get that to about 115%. I also have not messed with rear shocks at all. There is more in the suspension for sure. I think I can get it into the high 1.20’s.
 
THANKS!
No, but other than the 2 clicks today on the front struts I have not touched anything yet. I think the car has too much anti-squat (130%). I can make a bar adjustment and get that to about 115%. I also have not messed with rear shocks at all. There is more in the suspension for sure. I think I can get it into the high 1.20’s.
Where was the converter flashing to, and do you remember the shift recovery RPM?
 
Back
Top