Breaking up at high rpm, carb issues, and converter issues.

In a few weeks when you get better air, you are going to pick up a bit as well. Suspension tuning will be the next challenge because of cooler track temps.
 
In a few weeks when you get better air, you are going to pick up a bit as well. Suspension tuning will be the next challenge because of cooler track temps.
Winter project is going to be to stretch the quarters the right way, so I can drop the rear, it’s sitting up too high.
 
First pass I had to abort. I’ll explain lter

pass#2 with BLP original jetting .106/.118 and 28* timing.

5.95 @ 115.06 mph 1.30 60’ spinning.
Engine still missing up too, but not as bad.

AFR 11.5 all the way down the track.
congrats on the low 5.80's , glad to see you getting things sorted out.
I take it your misfire/missing you still had on the 2nd pass is now cured with the jetting and timing change?
 
Where do you think the extra mph came from, jetting?
 
By the way, I'm fuckin pumped for you, and also jealous as fuck!
 
This is why we do this right here. To see your friends reach goals that they have had for so many years is just awesome. Honestly, I'm happier for my friends reaching goals than I ever have been for my own.

Congratulations dude!!
 
This is why we do this right here. To see your friends reach goals that they have had for so many years is just awesome. Honestly, I'm happier for my friends reaching goals than I ever have been for my own.

Congratulations dude!!

I got out of work late yesterday, raced home, showered up, and met friends at the golf course. On every hole I laid my phone close to my golf ball so I would not miss any messages from Patriot Racer!😆
 
I did give Mitch an S.O.S. call after my first run.

The MSD 7AL-2 plus has two slots for chips. Slot one, I assumed was for the rev limiter. Slot two was for the 2 step.

I realized doing a burn out that I couldn’t get over 5000. When I put my thumb on the transbrake I was at 5000. I launched and the car hit a wall. I coasted to the end and went back to my pit.

I called Mitch asking about those slots. I read the instructions online and it said slot one is activated when 12v is given. I realized while Mitch and I were talking what happened. What took me a few minutes was why did the 2 step also work if I had an 8000 rpm chip in that slot. Then I realized 💡 the converter was stopping it.

Switched the chips and said hello to 5’s all day!
 
This is why we do this right here. To see your friends reach goals that they have had for so many years is just awesome. Honestly, I'm happier for my friends reaching goals than I ever have been for my own.

Congratulations dude!!
THANK YOU!

Funny, I was talking to a buddy that stopped racing about the same time I did in 2011. I told him I would be just as happy to see his car out at the track as I was last night.

He lives four hours from me and is in the middle of a 2002 Mustang gt w/ turbo build. I posted a rearend build that was for him. He is on this site and goes by FJB Racing.

It’s awesome helping friends.
 
I got out of work late yesterday, raced home, showered up, and met friends at the golf course. On every hole I laid my phone close to my golf ball so I would not miss any messages from Patriot Racer!😆
I saw that I'd missed from him yesterday also of course it's kind of hard to Bluetooth when you're doing 90 down the highway. Lol 🤣
 
I got out of work late yesterday, raced home, showered up, and met friends at the golf course. On every hole I laid my phone close to my golf ball so I would not miss any messages from Patriot Racer!😆
What did you shoot ?
 
Back
Top