In a maxed out heads up car, keeping the motor as high in the rpm band as possible is the key. In a car at your level if you are hunting every .001 of ET it is important to shift it 400-500rpm over peak HP, and fall back to max torque RPM.
Keep in mind that a convertor is not just about where it flashes to. They can be made to flash low, but fall back way to far on the shift, or visa versa.
Sure happy to hear you are in the ballpark now, and that BLP is being so helpful. They were a very good company to work with when I was buying new jets for my carbs.
Where you are at right now is where I have the absolute most fun running a drag car. Already able to make runs, so now it is just figuring out how to wring EVERYTHING out of the combo without getting stupid and hurting parts. FWIW......back when I was running my pickup truck, my really old 482bbc was still running the same factory gen IV block, crank, and connecting rods that I started out with over thirty years earlier. It did grow from a 461 in steps, but the new bore size and pistons got the same old rods and crank every time, and I would spin that poor thing to 8000rpm more often than I should have. lol
Given your MPH, I firmly believe you will see a 5.9x pass several times before the season is over!