Anyone been out at track in 2021

My shitter was apart all year until the end of August. Finally started running n2020210910_214638.jpg in this engine. This is from LSfest, stick shift class qualifying. The DA was 2600ish and the track prep wasn't that good. I had to leave really soft or I just blew the tires off. Pretty simple combo, 3300lbs, pump gas 405" LS2, t56 and 200 hit. It's been 9.99 na.
 
That's running well!
Thanks. I'm still ironing out the tune. A couple cylinders are a little fat. Pulling the heads now, it ate a valve seal at some point in Kentucky. My car us usually about .4 faster na at my local track (Atco). I had 1 n20 pass prior to LSFest.....and it was only an 1/8 mile hit to read plugs. Hopefully it runs in the 8's on this shot before I put bigger pills in it🤞
 
Very cool!! What clutch are you running? How does the T56 do?

Thanks. I'm still ironing out the tune. A couple cylinders are a little fat. Pulling the heads now, it ate a valve seal at some point in Kentucky. My car us usually about .4 faster na at my local track (Atco). I had 1 n20 pass prior to LSFest.....and it was only an 1/8 mile hit to read plugs. Hopefully it runs in the 8's on this shot before I put bigger pills in it🤞
 
Very cool!! What clutch are you running? How does the T56 do?
Currently running a Monster twin with sintered iron discs. I put that clutch in the night before I made the 1/8 hit at Atco before Kentucky. It's like a on/off switch....however I figured it out in 3-4 passes and can modulate it well enough to get it out of the hole.....I really like it.

My trans is faceplated with a 30 spline mainshaft....built by RPM Transmissions. I shift at 7400-7600 and 4th gen fbody t56's don't like anything above 7k. Not to mention I bent 6 yokes and got tired of struggling with hard shifts. Best money I've ever spent.

I have a Mcleod Soft Lock.....part of me really wants to try it out, the other part of me doesn't because of all the street driving I do with it. Reading your and everyone else's dealings with slipper style clutches gives me the itch to toss it in at some point.....
 
You would make the transition pretty easily since you are used to the iron disk now. As you know you just have to build heat in them before you try anything crazy.
Currently running a Monster twin with sintered iron discs. I put that clutch in the night before I made the 1/8 hit at Atco before Kentucky. It's like a on/off switch....however I figured it out in 3-4 passes and can modulate it well enough to get it out of the hole.....I really like it.

My trans is faceplated with a 30 spline mainshaft....built by RPM Transmissions. I shift at 7400-7600 and 4th gen fbody t56's don't like anything above 7k. Not to mention I bent 6 yokes and got tired of struggling with hard shifts. Best money I've ever spent.

I have a Mcleod Soft Lock.....part of me really wants to try it out, the other part of me doesn't because of all the street driving I do with it. Reading your and everyone else's dealings with slipper style clutches gives me the itch to toss it in at some point.....
 
You would make the transition pretty easily since you are used to the iron disk now. As you know you just have to build heat in them before you try anything crazy.
Any experience with the clutch tamer? I see many guys on the boards swearing by it...
 
That's an awesome 60'. Why did u stop running it? Details on your setup?
Twin turbo 5.3, jeffco 4 speed, mcleod rxt twin disc clutch, 9" 3.25 gear, 3480# 68 camaro.
I sold the car.
 
Dude that thing is fuckin sweet! Love the factory bucket seats!
Thanks, Honestly it drove like a brand new car. It was a Nelson engine and plumbing and & DMC did the cage work. I would have kept it had I fit in the car better. I even moved the seat mounts all the way back to the cage but still did not fit well
 
Thanks, Honestly it drove like a brand new car. It was a Nelson engine and plumbing and & DMC did the cage work. I would have kept it had I fit in the car better. I even moved the seat mounts all the way back to the cage but still did not fit well
Clean car bro.......and I do paint/ body/big wreck work for a living so I appreciate something done right. I've seen plenty of 1st gen cars boogied up
 
Thanks. I'm still ironing out the tune. A couple cylinders are a little fat. Pulling the heads now, it ate a valve seal at some point in Kentucky. My car us usually about .4 faster na at my local track (Atco). I had 1 n20 pass prior to LSFest.....and it was only an 1/8 mile hit to read plugs. Hopefully it runs in the 8's on this shot before I put bigger pills in it🤞
And we still have our home track, for now!
 
Back
Top