Anyone been out at track in 2021

Yeah, it's just tough to get to a tnt where I can get some passes in. Have only hit it on the street a few times, but couldn't tell anything, hit hard no slip. I drilled the hole for the pp spring adjustment, and bell already had a hole drilled for the air gap. Not looking forward to playing with this in the heat this summer, so in reality, it probably won't be til the fall before I can really do anything.
What kind of 60' s are you getting with your Black Magic clutch?
 
1.7s. If I knew what the hell I was doing with suspension tuning I think the car would be faster. The clutch is awesome!
 
Doug,
If they lift the mask bs I can come out & give you a hand one weekend.
How much base & counter are in it?
 
Here's the clutch I have in it now, what Ram recommended. Haven't been to the track yet with it. Ram Model 471CW, with a 800lb. base. Full sintered iron disc, steel flywheel. Ram tech said to start out, give all 6 screws 3 full turns out, total of 6 one full turn is 120lbs. So 3 times 120, is 360+the 800 base, gives me a total of 1160 base to start, if I'm doing my math right. That's where it's set now I believe that 1160 is probably too much pressure, but Ram doesn't want me to drive through it and slip it the first time at the track, they said that, and I can understand that. Starting out is better to have too much clutch than not enough. I also have about 9 grams of counterweight bolts on each lever, 27 grams total.
Thanks for the offer, Darren, I'll get it figured out, the biggest issue is getting tnt track time. I love Cecil, but they're mainstay anymore is running races, not tnt's, and I can understand that, that's where their money is. Cecil is a very popular place now, with all the other tracks around closing up, and there great track surface brings unbelievable amounts of racers to the track. And they're making it even better. Old slow guys like me are like Dodo birds.
I'll get it dialed in, but like I said, it might not be until the fall. I'm ok with that.
And PM me your address, I lost it, I'll send your clutch tamer back, looks like I won't be using it now.

 
Last edited:
Doug, that sounds high for base as I have 860# and 45g of counter.
With that iron disc you want to drive it around the pits & work it thru some gears to get some heat in it. Never want to make a pass on a cold disc as the heat makes em grab.
I set base pressure by backing off the adjusters until they "neutral" then turn desired number of turns so you always know where you are at.

As far as the Clutch Tamer, pass it on to another stick shift guy. It's what we do!
 
Doug, that sounds high for base as I have 860# and 45g of counter.
With that iron disc you want to drive it around the pits & work it thru some gears to get some heat in it. Never want to make a pass on a cold disc as the heat makes em grab.
I set base pressure by backing off the adjusters until they "neutral" then turn desired number of turns so you always know where you are at.

As far as the Clutch Tamer, pass it on to another stick shift guy. It's what we do!

I will Darren.
Apparently the minimum base/neutral in mine is 800lbs, that's the way the clutch came, the way I understand. Thanks for the tips, and I have a good idea, I'll be turning it back down, after the first passes. At the Cecil Nostalgia race last month, there were some serious stick guys there I know, and I was picking their brains about what base they were running. These were serious 9 second cars, and they were running less base than what Ram recommended to me, similar base as yours.
Anyhow, it will be a learning curve, got my balancer marked, my long allen socket, and I'm ready. Just hope I don't have to make any CW adjustments, don't want to have to pull that gd transmission out anymore!
 
I will Darren.
Apparently the minimum base/neutral in mine is 800lbs, that's the way the clutch came, the way I understand. Thanks for the tips, and I have a good idea, I'll be turning it back down, after the first passes. At the Cecil Nostalgia race last month, there were some serious stick guys there I know, and I was picking their brains about what base they were running. These were serious 9 second cars, and they were running less base than what Ram recommended to me, similar base as yours.
Anyhow, it will be a learning curve, got my balancer marked, my long allen socket, and I'm ready. Just hope I don't have to make any CW adjustments, don't want to have to pull that gd transmission out anymore!
I think you are on the right track Doug. I cut a hole in the bottom of my bellhousing, it's about 4" long and 2 1/2 inches wide for CW adjustment. If a clutch goes, down is fine with me.
 
Exactly, If this sob has to come out again, I WILL be cutting a trap door. Just an old Lakewood.
Thought long and hard about doing it before I put it back in last time, but figured I'll gamble, maybe luck out with what cw I have. We'll see!
 
I have had mine out & in & out so many times lately I probably have worn out the bolt holes!!
 
I will Darren.
Apparently the minimum base/neutral in mine is 800lbs, that's the way the clutch came, the way I understand. Thanks for the tips, and I have a good idea, I'll be turning it back down, after the first passes. At the Cecil Nostalgia race last month, there were some serious stick guys there I know, and I was picking their brains about what base they were running. These were serious 9 second cars, and they were running less base than what Ram recommended to me, similar base as yours.
Anyhow, it will be a learning curve, got my balancer marked, my long allen socket, and I'm ready. Just hope I don't have to make any CW adjustments, don't want to have to pull that gd transmission out anymore!
Changing counter weights is why I have a window in the scattershield. I have to pull the trans to change my base.
 
Haven't gotten past second round in several weeks, so I didn't feel the need to bore anyone with details. However, I made it to the final round at Northeast Dragway, on Saturday. Street eliminator runner up. I hung the redlight. Ah well. As I may have mentioned before, I am always finding ways to let my car down (it ran 7.46 on a 7.45 dial). :) Man did that event run long. Didn't run that round til 12:15AM and didn't pull in my driveway til 2:45AM. Take care. Tom Worthington
 
Changing counter weights is why I have a window in the scattershield. I have to pull the trans to change my base.

What base and CW are you running?
 
Went (x5) rounds out of (x6) yesterday at Island Dragway in NJ.

Ran the finish line good a couple times and had a 0.002 RT in R2 to get a by into R4.
R5 I kept the 11.25 dial on the car from R4.
I thought to dial down .002 which I should have done because I broke out by .002.
Turns out the guy I ran dialed 9.77 when I thought he ran high 10's.
My mistake because I always dial hard against cars that will have a big speed advantage at the end of the track.

bTEYYwwl.jpg


JT
 
Lost in the third round, at Northeast Dragway. Beat a Tesla in the first round, lost to the same Tesla in the third round. I made him work for it, though. .003 MOV. We were both wide open across the stripe, and the math makes that MOV about 5 inches. :) I had the slightly better light, but he was slightly closer to his dial. Take care. Tom Worthington
 
Went three rounds yesterday, last round was without a line loc or shift light due to a blown fuse. Ran my dial but redlit. Out the first round today. And so it goes…………..
 
Lost in the second round yesterday. Not a problem. I was really just trying to experiment with slowing the car with short shifting. Mission accomplished. Next, I am going to experiment with letting the trans shift itself on the 1-2 and manually shifting the 2-3. I can already tell I'm not comfortable with letting the trans make both shifts. They come on just too fast for that. Take care. Tom Worthington
 
Saturday for semi-pro. Was mainly wanting to get some runs in on engine changes I made but track events made semi the better choice.
New bests on quarter and eighth. I did stay in three rounds with a buy back on first. Hard to be consistent on something with unknowns at the moment but I'm happy with it as is.
 
Went 2 rounds yesterday and three today, redlit badly today. Stuck it in too deep.
 
Back
Top