Tune in on Sunday for....

[kilowattkid]

May have found the problem

Looks like it was wrestling a bolt

It looks like a 5/16 and it won

 

[Yoyodyne]

It looks like a 5/16 and it won

Variable balance weight.

 

[Mitch H]

So the glitter in the oil was just crap left in the engine from not being cleaned?

Some was left in the block, and some was made new......due to the dirt left in the block, and the main bearings being too tight.

 

[RacinDuallie]

SON OF A BISCUIT EATER!! Ford boys trying to play with big boy parts . Could be worse, dude could be a diesel homo.

Don't be jelly that a oilburner will consume more giggle juice than you Gasser.

 

[Mitch H]

I'd like to know the story on that piston / rod that you're tricking us commoners with.

A friend of Marks gave him that out of his funny car motor. I took a quick look at it, it has Hemi wrist pins. 1.090"

 

[itey]

Jeez…. At the minimum use plastigage…

I understand not everyone has the micrometers to measure inner and outer bores, but damn, I’ve built hundreds of engines and compressors using plastigage with no failures…

And if the block ain’t clean enough to put your tongue on it, it ain’t clean enough…

If you knew what these guys have put their tongues on you'd use a different metaphor.

 

[wickSS]

That was my synopsis after seeing the photo

I wasn’t privy of a photo! Hahaha.

 

[CompNut]

Weren't the clearances about right now that the bearings self clearanced?

 

[ratssass]

If you knew what these guys have put their tongues on you'd use a different metaphor.

no shit....read of you're exploits over at YB....

 

[Mark D.]

Sorry,,, had to…

No one staying here tonight. lol

 

[Mark D.]

Piston and Rod came out of my old buddy Bill Naves Top alcohol funny car.He gave it to me in 2013 at a race we were at it sits on my bar down in the basement.

FEATURE- Bill Naves

Drag racing results, news photos and highlights from NHRA and IHRA series events

www.dragracecentral.com

I'd like to know the story on that piston / rod that you're tricking us commoners with.

A friend of Marks gave him that out of his funny car motor. I took a quick look at it, it has Hemi wrist pins. 1.090"

 

[itey]

no shit....read of you're exploits over at YB....

you don't know shit but everybody else knows you're a YBIPOCLGTQIA so you don't need to brag about it

 

[ratssass]

you don't know shit but everybody else knows you're a YBIPOCLGTQIA so you don't need to brag about it

you had me at I don't know shit. Well played.

 

[itey]

you had me at I don't know shit. Well played.

well, you're fulla shit, so no wonder you try to throw it around

 

[itey]

May have found the problem

Why do the main bearings look like they don't have even load or contact across their width? Do we get to see closeups of the bearings?

 

[Steves32]

Why do the main bearings look like they don't have even load or contact across their width? Do we get to see closeups of the bearings?

That's a subscription fee. Ya gotta pay to see the good shit.

 

[Speed]

That's a subscription fee. Ya gotta pay to see the good shit.

It’s “sensitive content”, ya gotta be logged in to see it.

 

[itey]

Is somebody embarrassed to let people see it was assembled with dirt in it?

 

[RacinDuallie]

 

[Mitch H]

Why do the main bearings look like they don't have even load or contact across their width? Do we get to see closeups of the bearings?

Is somebody embarrassed to let people see it was assembled with dirt in it?

The motor was assembled at a shop somewhere. 89 Fox got it back assembled.

The main bearings are ALL scratched up, and they all have been burned blue.

You want to see a close up, then show up and I will show them to you. If you can keep from picking your nose, fingering your ass, and logging into YB trying to get a spot on a 15 man freight train, MAYBE I will even show you how to set up a 3 circuit dominator. Of course, nothing you fuck with would ever need a dominator anyhow......