350LUV
Extremely Large Member
- Joined
- Sep 30, 2020
- Messages
- 10,229
- Reaction score
- 22,474
- Points
- 153
Darin Morgan got the heads flowing 399.7, shooting for 800hp with around 400 cubes using the old 80's A3 heads.OMG….. no…![]()
Cleveland to be clear, not an LS![]()
What's your combo?
2200Nothing special,, just a 4 bolt SBC, RPM heads,
7102 edelbrock cam, matching intake w/ 660cfm black diamond carb to make it snappy for the street, MSD pro billet with a 6al-2 box… maybe 450-500 hp… ? But I only weigh like 2200 lbs total. I would need to back half the truck for it to hold any more serious power. It’s a handful as it is..
Just a street toy…
2200, not with you in it ?
0.465 lobe with 1.8 ratio steel T&D on intake gives .837 lift but 20 thou lash so 817 lift at valve, minus deflection and fuckery, lol.Pretty much figured that one out on my own…
That .836 lift,,, is that gross lift including rocker ratio ? Or is that the cam lobe ?
That sounds incredibly high for street driven…
Jumpins that's light. My 83 mustang hatchback with 351c, toploader and 8.8 was 3102lbs without meNo, I wasn’t on the scale… just the truck…
Local rock and gravel place, can’t remember the exact number, but it was a little over 2200..
I used the same place to find the front and rear axle and total weights on the crawler when I setup the suspension too..
Hell, LUV’s only weighed 2475 lbs from the factory in 1979.. with AC and full interiors…
Mines totally gutted…and I’m still looking to trim a few more pounds out of it.. a little at a time..![]()
Holy fack, that's heavier than 350luv's with him in ithahahaha..........my wagon is a street car................475hp/500'#/5-speed........................curb weight 5,870 pounds.
Be careful, heat exhaustion sucks. I sweat like a whore in church, can't see for sweat, can't take in enough water, lolGood morning PB. Almost got heat exhaustion yesterday helping neighbor. Need to drink more water.
Back at it again today, less work.
Y'all have a great day.