The morning crew check in

Good morning. Another day. Helping the neighbor put up some siding.
Y'all have a great day.
He's putting siding on his car port, or RV port.
IMG-2655.jpg
 
Morning y’all !!!

Bolting in a new 16” electric fan and wiring up the controller in the LUV… doesn’t overheat, but pushes 200° sitting in traffic… had to make it a pusher, not enough room between the water pump pulley and the radiator.. had to trim the metal valance under the grille a tad, but it’s bolted solid to the core support with 1/8” clearance to the radiator core… 😁👍
 
Morning y’all !!!

Bolting in a new 16” electric fan and wiring up the controller in the LUV… doesn’t overheat, but pushes 200° sitting in traffic… had to make it a pusher, not enough room between the water pump pulley and the radiator.. had to trim the metal valance under the grille a tad, but it’s bolted solid to the core support with 1/8” clearance to the radiator core… 😁👍
Is your engine on motor mounts or solid?
 
Yes, solid mounts in the first one… poly in this one..

They are stiff enough that the motor will rock and roll with the lope of the cam, but it absorbs a lot of the rattle in the cab…
Doesn’t matter too much, the entire truck shakes sitting at traffic lights… 🤣. I mean literally visually shakes…it’s enough to make me pop it into neutral sitting at a light…
 
Yes, solid mounts in the first one… poly in this one..

They are stiff enough that the motor will rock and roll with the lope of the cam, but it absorbs a lot of the rattle in the cab…
Doesn’t matter too much, the entire truck shakes sitting at traffic lights… 🤣. I mean literally visually shakes…it’s enough to make me pop it into neutral sitting at a light…
Lol
I put my finger on my mirror to stop it from shaking to see who's up my ass.
New cam is 278/284 with 836 lift but wider lsa so not sure if it'll sound any lumpier than old one.
Mine is a manual though.
 
Lol
I put my finger on my mirror to stop it from shaking to see who's up my ass.
New cam is 278/284 with 836 lift but wider lsa so not sure if it'll sound any lumpier than old one.
Mine is a manual though.
Damn, that’s a lot of lift…. BBF ?
 
Back
Top