The Corvair GM should have built?

Just remember, the Corvair gave us turbo mufflers

Long ago, before I "realized," some guy came into the parts store needing a Corvair generator. We did not stock one, and I went back and found a GM generator (NOT alternator) that looked exactly like the original, and he bought it. THAT (later) is when I found out that generator must rotate reversed
 
Last edited:
Wonder if this corvair is R.Nader approved..
 
The swing axles went away for the 2nd generation cars, but it was too late, they were DOOMED.

Odd... VW Bugs had swing axles for three years after the Corvair but 'Nader didn't complain about them at the time.
 
Wonder if this corvair is R.Nader approved..
Absolutely not...
I was at GM as a field service rep. We went to GO and spent a month burying that ignorant prick.
He got hold of a shit ton of owner correspondence and tried to blackmail GM into buying it back.
We punch carded every single one via screen fische readers and a room full of keyboard ladies that did the cards. It took a month by at least 40 of us to get it done.
< .1% were actually safety related.
 
Absolutely not...
I was at GM as a field service rep. We went to GO and spent a month burying that ignorant prick.
He got hold of a shit ton of owner correspondence and tried to blackmail GM into buying it back.
We punch carded every single one via screen fische readers and a room full of keyboard ladies that did the cards. It took a month by at least 40 of us to get it done.
< .1% were actually safety related.
My comment was for humor only lol
 
Just remember, the Corvair gave us turbo mufflers

Long ago, before I "realized," some guy came into the parts store needing a Corvair generator. We did not stock one, and I went back and found a GM generator (NOT alternator) that looked exactly like the original, and he bought it. THAT (later) is when I found out that generator must rotate reversed
Strange. Does a Generator produce DC by itself? I know an Alternator can be spun in either direction since it produces AC and has diodes inside it to convert it to DC.
 
They should have put that 300 inch aluminum V8 in the Vega. One of my pals built such a deal and it was slick as a prom date full of tequila.
Just remember, the Corvair gave us turbo mufflers

The Corvair Turbo muffler was pushed into the limelight in 1973 by a Hot Rod Magazine article about the results of a muffler test at Portland International Raceway. The Turbo muffler won because of all the mufflers tested, commercial and homemade experimental, it had both the most dB reduction and the least effect on performance compared to open headers. I'll take credit for this because I pushed my pals to use them for the test. We bought them from the Chevy dealer.

Portland International Raceway (PIR) is a Portland city park, thanks to a large effort in the mid '60s by both drag race and road race groups to petition the city to support a real race track. A community effort of local drag racers, SCCA, Cascade Sports Car Club, auto parts stores and repair shops and their customers, and countless others, we all circulated petitions and collected signatures from the public, and fortunately most people were agreeable with the plan to have a local race track as an incentive to get racing off the streets.

Then, the same old story, people bitching about race tack noise and trying to use that as an excuse to close the track. This was in the time before strict noise laws were enacted with measured dB numbers, so open headers were the only game in town until the the anti-track effort promoted by some city commissioners who were in the pockets of the real estate developers who wanted the track property (they still do) tried to put a stop to racing by promoting anti-noise sentiments.

Ironically, years later a "scientific research" program paid for by the city that was supposed to be a hit piece to kill the track found other noise sources in the offended neighborhood were louder than the track, city busses, lawn mowers, church bells, freight trains, general traffic noise and the crowds at local high school football games. LOL.

The muffler test at the PIR track in February 1973 was organized by Jim Rockstad who was managing/promoting drag racing in Portland and Seattle and other PNW tracks, Yakima and Eugene and ??. He asked local racers to show up for a test session in February to test and tune and bring whatever muffler system we thought might be successful to quiet a race engine and not hurt the power. We all know mufflers hurt power, eh? Not necessarily so if you do it right.

Hot Rod Magazine printed a small piece about the track test in an April or May issue and I think National Dragster also mentioned it in March.

You can bet the advertisers in Hot Rod were not happy a stock GM muffler made them look bad so the magazine staff did another 'official' test of their own with a dyno and fancy bla bla about a scientific dB meter and printed a several page deal in October 1973, link here -->. https://www.hotrod.com/features/the...azine-muffler-test-october-1973-982-986-118-1

The test we did at the race track in February was measured with dB meters by the city and state DEQ personnel and some students from Portland State College who were members of an environmental advocacy group called OSPRIG.

The same OSPRIG students were involved when we tested mufflers in our boats so we could have a water ski race on the Willamette River in Portland. Irony of ironies, the mufflers I used, which were half of a Thrush straight-through can stuffed in and held in the Bassett collector with bailing wire, made the 454 in my flatbottom have more low end yank from idle and did not hurt the peak RPM at all. The mufflers got it down to low 90s dB and then adding an open element GM air filter made it 86-87 dB, so the DEQ and OSPRIG kids were happy, but the city karens still wouldn't let us race under the bridges in downtown Portland.

No kidding, that February 1973 muffler test at PIR was the bump that put the Corvair Turbo Muffler in the dragracing media limelight and made "Turbo Muffler" a thing.
 
Last edited:
Just remember, the Corvair gave us turbo mufflers

Long ago, before I "realized," some guy came into the parts store needing a Corvair generator. We did not stock one, and I went back and found a GM generator (NOT alternator) that looked exactly like the original, and he bought it. THAT (later) is when I found out that generator must rotate reversed
Strange. Does a Generator produce DC by itself? I know an Alternator can be spun in either direction since it produces AC and has diodes inside it to convert it to DC.
Yes, generator output is DC.

The CW-CCW difference is the radial locations of the field windings and brushes, to clock the armature segments for best EMF transfer from the static magnetic field to the rotating armature. The result is similar to adjusting spark timing in a combustion engine, there is an ideal position for the desired result. There is an example of brush/armature/field magnet timing in slot car racing, modified slot car motors are tweaked by advancing and retarding the brushes for either more low end or more top end.
 
Last edited:
Back
Top