Shout out to…..

Hmmm 🤔, so you drank the kool aid and went with Pro Systems? That reply you posted is just a generic reply he does plus or minus some paragraphs from what I’ve seen with some local racers inquiring about a carb spec build that they shared with me. With that said I wish you Good Luck 🍀 In the future I’ll just use my own carb building/tuning half smarts n hit up local shop member OJH for parts/advice help. On another note nice intake. I had one yrs ago for a 4500 flange and sold it n regret it. Lil Ed is good people too. Whenever I figure out what I wanna do for a spare/next engine maybe I need to contact Mark. No real Black Friday sales on rotating assemblies going on or available……😳🙄🙄🙄
I figured that was a generic response because he sent it so quick after an email. This is why I couldn’t understand why you wouldn’t just post up who you weren’t happy with in your carb thread. Could save someone a headache in the future. We’ll see what happens when it’s all put together and running.
 
I figured that was a generic response because he sent it so quick after an email. This is why I couldn’t understand why you wouldn’t just post up who you weren’t happy with in your carb thread. Could save someone a headache in the future. We’ll see what happens when it’s all put together and running.
I can see your point. With my past history of pissing off some parts sellers and me getting older n more mellow I’ve learned to sit back n listen some before “offering my opinion”….I guess?? 🤷🏻
 
The BMP intakes I’ve seen are real nice n smooth. I got a victor for my big block and it’s not near the same league. And BMP makes real good power.
I was watching this Eric Weingartner video last where he briefly compares the Edelbrock Super Victor and BMP. He says the Edelbrock casting is actually smoother out of the box and requires less work than a BMP. He also talks about the cause and affect of having unequal length runners and how it affects the dip in HP during the rpm range.

With that said I started to wonder if the BMP would have a slight benefit in that department due to it being taller? I’m sure it could be tuned by using spacers, but I was just curious.

The HP dip he is referring to on the dyno is probably irrelevant on a drag car that launches over 5,000 rpm anyway. I’m not sure if anyone has ever done any back to back testing using these two intakes?

 
In the end it is numbers manipulation on the dyno that sells parts. You just have to ask yourself "Is this someone who I can work with and feel that I'm being treated fairly?"
If the answer is yes then use them, if the answer is no then go somewhere else.
 
In the end it is numbers manipulation on the dyno that sells parts. You just have to ask yourself "Is this someone who I can work with and feel that I'm being treated fairly?"
If the answer is yes then use them, if the answer is no then go somewhere else.
I’m also trying to get a better understanding of how and why things work and get done a certain way. I can turn wrenches with the best of them, but I’ve been a little short on the more technical aspects of this game. Such as understanding camshafts, porting, head flow, etc.

The BMP is pricey compared to the Super Victor, but it’s available and honestly I wanted to try something different, so I went with the BMP. I think it will work fine for my needs.
 
I’m also trying to get a better understanding of how and why things work and get done a certain way. I can turn wrenches with the best of them, but I’ve been a little short on the more technical aspects of this game. Such as understanding camshafts, porting, head flow, etc.

The BMP is pricey compared to the Super Victor, but it’s available and honestly I wanted to try something different, so I went with the BMP. I think it will work fine for my needs.
I dont blame you a bit, I don't follow the same path that everybody else does if that hasn't been noticed by now. If I did I would take a big block with a slushbox automatic behind it and let go of a button and let an air bottle shift for me and then go back to my handlers like Joe Biden and let them wipe my ass too.
 
I dont blame you a bit, I don't follow the same path that everybody else does if that hasn't been noticed by now. If I did I would take a big block with a slushbox automatic behind it and let go of a button and let an air bottle shift for me and then go back to my handlers like Joe Biden and let them wipe my ass too.

Pretty much fits me to a "T". :cool:

If your double nickel is still in paint prison next year, I still have an opening for that ass wiper position.:chuckle:
 
Mark and Toby at Vigilante Performance. Mark has been helping me spec out my new engine, research parts for a couple months now. Toby assembled my heads, and ported my new BMP intake. Parts are finally starting to roll in.

This is the finest stuff I’ve ever had the privilege of buying. Heads look great, but I was super impressed when I pulled this intake out of the box.

I know Mark doesn’t want or need shout outs, but he’s getting one anyway. Thanks!:usa:



I will take a step out on a limb and say that cylinder head, with the port and combustion chamber work evident in the pictures, will be very efficient in the 'fast burn combustion' sense and will be happy with less spark advance, particularly at the torque peak, than many folks try to force an engine to suffer.

I have seen heads like this require 5 or 6 degrees less advance for peak torque than they require for peak HP. Sadly, setting up a distributor for this and using a distributor machine to do it is a lost art.

It isn't the case here, but with a restricted intake, 390 4bbl or 2 bbl, some engines require 10 degrees more timing from peak TQ to peak HP.
 
Care to share what you know about this?

Sure......it is called an emoji

This particular emoji shows a man putting his forehead into the palm of his hand.:thumbup:

Oh, that one was a "thumbs up" emoji.......
 
Did you want to correct my spelling or punctuation, or was it the subject matter?
 
I know some people here aren’t fans of Pro-Systems, but when we discussed the carb, here was Patrick’s explanation:

he/they did a 1300 cfm for a 632 i had yrs ago it went a good tenth faster in the 1/4 than what it replaced used a RM edelbrock intake and the 1300. no jetting, no messing... car ran predictable numbers and was gas.

i had a few shares of the go to recommended guys on the forums over the yrs without good luck... so just becuase some guys had issues, doesnt mean everyone will.
 
he/they did a 1300 cfm for a 632 i had yrs ago it went a good tenth faster in the 1/4 than what it replaced used a RM edelbrock intake and the 1300. no jetting, no messing... car ran predictable numbers and was gas.

i had a few shares of the go to recommended guys on the forums over the yrs without good luck... so just becuase some guys had issues, doesnt mean everyone will.
Pro-systems was the bees knees back when I built my orange notchback in 2011. My car ran great for what it was with a pro-systems carb. Then I got out of racing for about 10 years. Naturally when I came back I went back to pro-systems. That is when I started hearing all of the complaints.

I have it so I’m going to run it and see what happens.
 
Pro-systems was the bees knees back when I built my orange notchback in 2011. My car ran great for what it was with a pro-systems carb. Then I got out of racing for about 10 years. Naturally when I came back I went back to pro-systems. That is when I started hearing all of the complaints.

I have it so I’m going to run it and see what happens.

the carb i bought was around 09. i think they had some issues then also. i also think in the past 10-12 yrs with the forums and FB people have become alot more vocal on every little thing. that doesn't make it right if a guy found metal shavings in a bowl. thats on QC..... maybe im just alot more tolerant to things than some.
 
Back
Top