Shout out to…..

Patriot Racer

Freeeeeeedom!
Joined
Sep 18, 2021
Messages
9,229
Reaction score
24,327
Points
153
Location
Northern Illinois
Mark and Toby at Vigilante Performance. Mark has been helping me spec out my new engine, research parts for a couple months now. Toby assembled my heads, and ported my new BMP intake. Parts are finally starting to roll in.

This is the finest stuff I’ve ever had the privilege of buying. Heads look great, but I was super impressed when I pulled this intake out of the box.

I know Mark doesn’t want or need shout outs, but he’s getting one anyway. Thanks!:usa:



 
The BMP intakes I’ve seen are real nice n smooth. I got a victor for my big block and it’s not near the same league. And BMP makes real good power.
Mark told me that Toby commented that it was hard to port, good aluminum, not soft junk.
 
Some day I would like to have the coin for this intake.

 
Being a 428ci it couldn't benefit with a 4500 intake/carb? That said if you were ever to try a dominator carb, ive seen some people et quicker using the moroso 2" 4150-4500 adapter on a their 4150 intake than using an actual 4500 intake. Smaller plenum creates more velocity.
I know some people here aren’t fans of Pro-Systems, but when we discussed the carb, here was Patrick’s explanation:


Looking the specs over, for your big inch small block we have an 1000 HP gasoline carb that instead of using the small fuel port 4150 metering block configuration, we internally upgrade to dominator style big fuel port metering on a 4150 size carburetor (see photo of carb in the link below).

The Dominator style metering 1000 really steps things up as compared to a normal 4150. It has those big port passages (unlike the small fuel port 4150 standard metering configuration), perfect for your big inch small block engine (they pulse real hard and love big fuel port passages).

This design offers faster acceleration and shift recovery over a standard 4150 as it has a metering design (using modified Holley metering blocks) much like a Dominator, but on a 4150 package. It really gets rid of lean launch conditions, lean shift spikes (I've taken guys from 2 inch wheelies to 2 foot wheelies with this setup).

Its very driveable too with great street manners. : )

As you can expect, it has our adjustable air bleed configuration, non-stick gaskets, drag float, stepped dog leg boosters, Billet baseplate, jet extensions, a complete wet-flow portfolio (for easy jet selection, but I'm usually dead on or within 2 numbers) and the new style big sight glass bowls.

It'll probably flow in the 980-1000 REAL cfm range. I'll know more when I am flowing it for the application.

Typically it'll make 25-35 more hp than any out of the box design and with the dominator metering it'll hit you hard when you stand on the throttle.

You can spray it up to a 350 shot if the need ever arises (you never know). Thats well spent money.
 
😆 Call me old fashioned, but I like an all motor carbed combo. I’m not trying to break any records other than my own.

you’ll change your mind when you realize turning on the bottle Is way easier than swapping converters, cams and rear gear every 5 seconds. I wonder he didn’t touch the floor on that intake? Stuff looks good
 
you’ll change your mind when you realize turning on the bottle Is way easier than swapping converters, cams and rear gear every 5 seconds. I wonder he didn’t touch the floor on that intake? Stuff looks good
I always thought you leave it rough to allow the air/fuel to atomize. The important thing is the runners and transitions being smooth, but maybe Mark will chime in.
 
shift recovery is available as an option .. whu gnu ?
 
Back
Top