1 / 10
2 / 10
3 / 10
4 / 10
5 / 10
6 / 10
7 / 10
8 / 10
9 / 10
10 / 10
***Post a MEME Thread***
- Thread starter lumen8
- Start date
FABd UP
Gold Member
- Joined
- Jan 17, 2021
- Messages
- 6,857
- Reaction score
- 14,515
- Points
- 153
So I am not alone in having a major issue with the washers being installed with the top stamping facing outward. I had a couple younger guys helping with a machine assembly one time and informed them of that requirement. They looked at me like I was losing my shit. I explained that I would lose my shit if protocol wasn’t followed. Some things are wild how they affect you.
99PanozAIV
Platinum Member
- Joined
- Mar 10, 2020
- Messages
- 16,637
- Reaction score
- 34,727
- Points
- 153
Yep, and all visible fasteners must be turned to a predetermined, identical alignment for the project..
Lumbergh
Longtime member
I’ve taken stuff apart and re-assembled just because of that, many times, lol. I line them all up even if they’re stacked….happy to hear it’s somewhat normal, I fuckin knew it!
Yoyodyne
Open the pod bay door, HAL
AN washers are the same on both faces, come in several size variations.
I make my own washers for a critical application. Turned from 4140Ht bar stock to ±.001 OD, +.003/-.000 ID, ground on both top and bottom to ±0005 th.
I make my own washers for a critical application. Turned from 4140Ht bar stock to ±.001 OD, +.003/-.000 ID, ground on both top and bottom to ±0005 th.
Yoyodyne
Open the pod bay door, HAL
