Jet w 21 people onboard crashes in field near Houston, All Survived

Oh...Any landing when you can use the aircraft again is a good landing! Just sayin! Dave
Dave, could you please bump this thread w any reliable updates you come across YOU deem legit?

Paraphrasing IIRC items below:

1st odd item mentioned yesterday was Jet hadn't been used since last December. (Approx 10 or 11 months sat idle?)

2. "Puff of smoke seen on takeoff from one engine before takeoff aborted. (Flameout?)

3. Jet was used in Scandinavian (Swiss or Norwegian?) climate for approx decade, then was purchased and used by Aero Mexico for approx a decade before purchase by current owner...

4. Airframe approx 1989 vintage.

5. Immediately after crash local news reported all inspections and services were up to date.

Thx in advance Dave! ✈

AllRev
 
There is nothing so far on the Aviation Herald and without being able to find a tail number for this aircraft
I have nothing to add.

In the S.I.M. we would have our runway analysis, know the weight with how much fuel was onboard, cargo and atmospheric conditions and plot our V1 and Vr and V2 speeds and reject. In the real world you never reject, especially in a 747, all you are going to do is blow all 18 tires out and still have a ground incursion! We just put it in the air ( If it is just 1 of 4 engines out), get in the pattern and
come back around and do an overweight landing. In the old days we would dump fuel to get down to max landing weight, today fuel is very expensive so we don't dump, we land overweight, do an inspection, sign it off and we are good to go!

It appears this MD-87 was rejecting from what we know right now, don't know the reason just yet and don't want to second guess the crew, we will have to wait and see but the NTSB can sometime take years to say what happened.
 
Last edited:
There is nothing so far on the Aviation Herald and without being able to find a tail number for this aircraft
I have nothing to add.

In the S.I.M. we would have our runway analysis, know the weight with how much fuel was onboard, cargo and atmospheric conditions
and plot our V1 and Vr and V2 speeds and reject. In the real world you never reject, especially in a 747, all you are going to do is
blow all 18 tires out and still have a ground incursion! We just put it in the air ( If it is just 1 of 4 engines out), get in the pattern and
come back around and do an overweight landing. In the old days we would dump fuel to get down to max landing weight, today
fuel is very expensive so we don't dump, we land overweight, do an inspection, sign it off and we are good to go!

It appears this MD-87 was rejecting from what we know right now, don't know the reason just yet and don't want to second guess
the crew, we will have to wait and see but the NTSW can sometime take years to say what happened.
Thxs Dave Out of town Antiquing w Mrs...quick search for tail number gave this addtl info:

"33 year old MD-87
The FAA confirmed that the aircraft involved in the accident was registered as an N987AK. The MD-87, built in 1988, was owned by 987 Investments owned by real estate entrepreneur James Alan Kent, who, according to media reports, was himself on board as a passenger in the accident. As of January 2018, the Cirium database shows 49,400 flight hours and 31,900 flight cycles for the two-jet engine. The MD-87 was once produced as an airliner for Finnair, where it operated as OH-LMB until 2000. Aeromexico then took over the aircraft and operated it under the registration number N204AM. The MD-87 finally came to 987 Investments in 2015 via two further stations. The company had the former airliner converted into a business jet with 19 comfortable seats and has been flying it in this configuration since September 2017
"

Crash of an MD-87 in Texas: no casualties, despite the inferno
 
There is nothing so far on the Aviation Herald and without being able to find a tail number for this aircraft
I have nothing to add.

In the S.I.M. we would have our runway analysis, know the weight with how much fuel was onboard, cargo and atmospheric conditions and plot our V1 and Vr and V2 speeds and reject. In the real world you never reject, especially in a 747, all you are going to do is blow all 18 tires out and still have a ground incursion! We just put it in the air ( If it is just 1 of 4 engines out), get in the pattern and
come back around and do an overweight landing. In the old days we would dump fuel to get down to max landing weight, today fuel is very expensive so we don't dump, we land overweight, do an inspection, sign it off and we are good to go!

It appears this MD-87 was rejecting from what we know right now, don't know the reason just yet and don't want to second guess the crew, we will have to wait and see but the NTSB can sometime take years to say what happened.
Todays local KPRC News 2 reporting "two jammed elevator actuating cranks" "Elevators were jammed in the nose down position"
 
Back
Top