I found a bunch of gold! I'm rich!

Well, now what

  • Change the oil, run it a few more miles, check again

    Votes: 32 78.0%
  • Pull it apart.

    Votes: 9 22.0%

  • Total voters
    41
399 cubic inches isn't normally enough to get this crowd excited
One of my favorite cars was my 4 door foxbody with 183 cubic inches of fury. It got more attention than I ever thought it would. I sanded the Mercedes logo off the valve cover, painted it Ford blue, and stuck a Power Stroke Diesel decal on it. Non-car people were confused and car junkies loved it.
 
Hence the "change oil and filter then send it" recommendations

I get it.. but honestly I'm trusting race car Ronnie's opinion on this. He hasn't been wrong thus far and based on every other experience I've had he seems to have the most ford specific knowledge.

Not to mention this isn't a full on race car that gets rebuilt every winter, would like this turd to last as long as possible. The amount of material in there should be cleaned out
 
It only becomes epic when I pull the thing apart and like btd said we find nothing wrong
Only posting to try and provide a little motivation from one ford guy to another
Got the 390 for my f100 back from the machine shop, assembled it, ran great but developed a rear main leak in short order, not terrible but I hate things leaking horsepower so out it came, tear down to check things out and repair rear main leak.
Reassemble, drive a few more months and yup, that fucking seal takes a shit again, so rinse and repeat, but this time I did it with a cylinder cast on my leg after quad tendon reattachment.
I’m 68, so I know you’re a lot younger than me.
What I’m getting at is just do it, it won’t take that long, a full day at best out, tear down and reassemble irregardless if it’s toast or not.
You can do this, everyone is curious as to the “final solution”
Oh wait that’s a different thread
Good luck
 
Back
Top