Engine first start

kwplot34 said:
Are you using an electric fuel pump? if so turn the pump on.
Electric water pump? turn it on.

You are now primed.
Click to expand...

Boy i thought i was told don't turn them on dry


If you know what i mean
 
As for the fuel and water pump. If the fuel pump is mounted below the tank it will not take but a few seconds for the fuel to get to the pump. If you have water in your cooling system your water pump will not be running dry.
 
It is a Ford, you guys actually think it will start for him............. ;)

I'm glad you bought a good water pump, I know a certain someone on here hates me for jinxing him with the CSR..........

But he does have the BEST now! :)
 
ironpony said:
I have heard Ford "guys" like going in dry.............. Dude I really, really hope you are asking some of these questions for comedic value.
If not put the wrench down and back away from the car
Click to expand...

Zero comedy in my questions. The worst part is i have much dumber questions i avoid asking because of meanies like you.

Yes, really.

It'll be a shame when this here retard has a decent hot rod, built not bought
 
89 Fox 351 said:
Zero comedy in my questions. The worst part is i have much dumber questions i avoid asking because of meanies like you.

Yes, really.

It'll be a shame when this here retard has a decent hot rod, built not bought
Click to expand...
Can you put this fuckery off until Friday? I’ll run up and help you.
 
89 Fox 351 said:
Well i don't expect the thing to fire honestly, and if it does i expect it to either shake, shudder, run like shit, or break something because like i stated, 3 builders, and none gave a shit, just wanted my money.

So I'll see you on the 15th 🤣
Click to expand...
Text me the coordinates. And have coffee ready.
 
This is what’s left of that Cummins explosion in the dyno cell. They had it at PRI after that happened, I talked to them and they had made some 2300-2400 HP pulls already and they went to do another pull and at 2200 HP the block left the dyno cell.
 
Road trip for the dynamic duo 😎
 
What did you do with the heater hose fitting in the intake? Pipe plug in it? Open that fitting and fill rad until coolant comes out of it. Close it and run water pump a minute. Shut it off and open heater hose fitting (or remove pipe plug) fill rad again until coolant comes out, close it and top off rad.
 
Mi.5.0Fred said:
What did you do with the heater hose fitting in the intake? Pipe plug in it? Open that fitting and fill rad until coolant comes out of it. Close it and run water pump a minute. Shut it off and open heater hose fitting (or remove pipe plug) fill rad again until coolant comes out, close it and top off rad.
Click to expand...

I bought a bypass hose, waiting on its arrival
 
Next question, how do you feed a gorilla like @Bangr after he's been on a road trip and grumpy?

Do i hire cheerleaders? I mean, my step mom will be there?
 
You must log in or register to reply here.
Back
Top