Breaking up at high rpm, carb issues, and converter issues.

Dumb question, but did you try a new set of spark plugs? My car at the track a couple of years ago had a high speed miss with which I found was new spark plugs, found it on the 2nd to last pass. Put in the old ones and BAM right back to 7400rpm sounding like a smooth machine. Pretty surprised by that one, but it was nice when O'rileys took them back and gave me a refund.
Yes, new plugs first time out and replaced all of them the 2nd time out.
 
Yes, new plugs first time out and replaced all of them the 2nd time out.
Here's trick I learned from my cousin when he suspects an ign problem. He gets out a spray mist bottle then fills it with water and waits for it to get dark outside. He will spray the ign wires and plugs down and then look for leaky spark as it will take the least path of resistance. It works to find bad plug wires for sure. How did your valve spring pressure look at full lift also?
 
They told me to send it back. I’m working on the ignition issues.
I don't blame ya for sending it back that's a damn good company that wants to make sure their shit is right and it was well worth it for peace of mind.
 
I don't blame ya for sending it back that's a damn good company that wants to make sure their shit is right and it was well worth it for peace of mind.
Not many companies have people that give you their personal cell number to talk through things. They wanted to be sure it wasn’t carb issues causing the miss.

I let them know I thought there was an ignition issue. I chose to pay 1 day air because I want to get back out there. I also chose to pay 1 day air back to me. There is a test n tune this Friday and I want to see if the rewiring I’m doing fixes this.
 
High RPM misfires are the hardest to track down, I spent a season tracking it down on my 79. What I found on it was it was dropping power to the ignition box under high load, a terminal block I was using was no good. Took forever to find it, just cuz it’s so hard to run a car like that ( yours too ) at high RPM and diagnose 🤣, kinda paying attention to driving 😜

Good call sending the carb back 👍, just to eliminate a possibility.
 
Which kind of a scope? An otoscope? An oscilloscope? periscope? Scope the mouth wash? 🧐
Oscilloscope to check the signal coming out of the MSD distributor. Look at the cap/rotor, see if there's any evidence of the distributor main shaft walking upward and causing wear. There's a remote possibility that the reluctor is moving away from the pickup at higher RPM, just enough to cause an issue.
 
Oscilloscope to check the signal coming out of the MSD distributor. Look at the cap/rotor, see if there's any evidence of the distributor main shaft walking upward and causing wear. There's a remote possibility that the reluctor is moving away from the pickup at higher RPM, just enough to cause an issue.
I looked at that already. Nothing out of the ordinary from what I can tell.
 
I sent the carb back to BLP 1 day air. Cost me $140, but I wanted to get it back asap, so I can get back to the track. They received it this morning and slapped it on their 670HP motor.

They will be running it to see what they find. I will post if I hear from them, but they sent me this already.


I see the problem right there in that picture. You're putting a GM carburetor on a Ford engine LOL.
 
Looks like I will miss T&T tomorrow night since I still have my problem still, going to replace the plug wires again with a different brand and try it again. Was going to get the Moroso wires but I don't want to wait, going with the MSD, I can have them Thursday.
 
And this right here is why the shelf in my parts room in my shop Looks like a goddamn summit closeout section. I know we've all done it and I don't wish it on anybody but it's kind of nice to see somebody else overnighting shit like crazy mid-week. Nice to know I'm not alone!
 
I see the problem right there in that picture. You're putting a GM carburetor on a Ford engine LOL.
They needed a reliable test engine, so they couldn't use a ford :ROFLMAO:
 
Bad tachs, bad rpm chips, bad ignition switches are some things that I’ve found after spending $8,000 trying to fix a high rpm flutter.

I hate chasing that kinda stuff.


Mitch developed a really bad bog when the tires hit… almost shut off then started bucking real bad till downtrack then haul ass. Chased it for weeks & spent a ton of $$. No fix. He showed up at the door car shootout with the issue & there were a LOT of badasses working on it for days & we tried stuff that was really off the wall & never did find it.

I think I might have maybe found it while shaking the car down @ the YB Nats… bad Ferd style solenoid that pulled the power stud out when I tugged on the nut holding the power cable on.

Stupid shit you never would suspect is sometimes the issue.
 
According to the sheet the jets are numbered in 1000ths of an inch difference.

106 - 86= 20… - 84 is 22. That’s 20ish % in area. That’s a Royal Fuck Ton.

The main wells should be around .160 so flowing enough @ 106 wasn’t the problem.

I don’t get it.

My only personal experience with a high rpm breakup has always been electrical.

Looking at his ET vs. MPH on the runs....my personal experiences would lead me to believe he was still pig rich. That is a shit ton of MPH for those ET numbers. 115 mph in any of my old cars would be 6.000 or quicker.

Gonna keep catching up on this one. Sitting at home with a good case of vertigo for the first time in my life, and it royally sucks! lol Very interested to see the outcome on this one.

And FTR, despite the current issue, that little buggy is rolling out nicely!💪
 
My only personal experience with a high rpm breakup has always been electrical.

Looking at his ET vs. MPH on the runs....my personal experiences would lead me to believe he was still pig rich. That is a shit ton of MPH for those ET numbers. 115 mph in any of my old cars would be 6.000 or quicker.

Gonna keep catching up on this one. Sitting at home with a good case of vertigo for the first time in my life, and it royally sucks! lol Very interested to see the outcome on this one.

And FTR, despite the current issue, that little buggy is rolling out nicely!💪
Vertigo sucks, I've had my share of ear issues and have battled chronic dizziness for about 3 years and finally think I got it figured out.

I have been hoping that you would chime in here eventually. Along with a few others already in here, your thoughts, opinions, and experiences are always appreciated, and I pay close attention to them.
 
at 13-1 id probably go with c12 VP
esp at lower elevations
that isnt your issue, but its a better choice imo

According to VP.......C12 has won more motorsports competitions than ALL of their other fuels combined. IMO, it is the ONLY fuel I would run in your combo.
 
Back
Top