Big Bore 427w

That’s more room than I have.
Yeah and the height is the real pain. I can't put it in my back shop, the doors are tall enough. That's the only thing that annoys me about it.
Also, I responded to your post before I saw you bought a lift so moot point I guess.
 
Cool on the big bore block high compression build. I’m about to pull the trigger on a Scat 13.5 comp. Rotating Assembly to stuff in a D4 Stock 351W block combo. I already have AFR 220 renegade NIB heads and a new era Holley Hi-Ram carb tunnel ram for 2 x 4’s with a virgin set of 660 center squirter’s with aTon of mods for the carbs. No real reason to do it other than I always wanted too. Currently I have a Dart block 427W in the car with 21 passes that’s good to go. Just thinking about doing some outside of the box stupid stuff I dreamed of decades ago while I’m able to do it kinda thing I guess?? šŸ¤·šŸ»šŸ¤·šŸ» What’s cooler than a tunnel ram with a stick in a mini tubbed car??
 
I pulled the factory windshield today because I have a 3/16ā€ optic armor going in. Not a huge weight savings, but my windshield had spark damage on it from cutting out the cowl when the hood flew up once upon a time. My dumbass got a little O.Z. And forgot to cover the windshield.

Factory glass - 24.1lbs
3/16ā€ Optic Armor - 11.3lbs
Savings - 12.8lbs

 
Last edited:
No real progress on the car other than scraping all of the old sealant off the edge of the windshield.

I did find out that the Optic Armor DIBO (drop in black out) windshield is cut to where you don’t have enough material to drill and use screws to hold the window in. They are designed to use sealant just like a factory window. It’s good to 150mph. I have to order the sealant.
https://www.summitracing.com/parts/oaw-70a61411

If you are faster than that I believe they have over sized windows that are trim to fit and then use screws, etc.

 
I’m not sure if mentioned this yet, but there were doubts about the longevity of the C4 at the expected power level I’ll be at, so I’m switching to a TH400 built by Proformance Transmissions. I went with the Reid SFI case, so I do t have to worry about a trans shield or blanket.

I did a bunch of research to see if my current hurst quarter stick shifter for C4 would work with the TH400 if using the right bracket at the transmission. The answer is NO. The detents are spaced differently on the shifter and transmission, so I had to buy another shifter.

I want to keep it simple, so I bought another quarter stick. Simple swap. Transmission should be done in about 4 more weeks.
 
I’m not sure if mentioned this yet, but there were doubts about the longevity of the C4 at the expected power level I’ll be at, so I’m switching to a TH400 built by Proformance Transmissions. I went with the Reid SFI case, so I do t have to worry about a trans shield or blanket.

I did a bunch of research to see if my current hurst quarter stick shifter for C4 would work with the TH400 if using the right bracket at the transmission. The answer is NO. The detents are spaced differently on the shifter and transmission, so I had to buy another shifter.

I want to keep it simple, so I bought another quarter stick. Simple swap. Transmission should be done in about 4 more weeks.
Your the kinda guy that’d love a stick trans!!! Just saying. Yes it’s $$$$ but…..ya only go around once!!
 
Your the kinda guy that’d love a stick trans!!! Just saying. Yes it’s $$$$ but…..ya only go around once!!

I have to agree with you Tater. Once you get a handle on it, you'll never have a dull moment racing!
 
Fire is lit!

Picked up my motor city solutions 9ā€ front spoiler a couple days ago. Today is a nice day, 49* and the sun is out and garage door is open.

Since I just moved and don’t currently have an air compressor (sold it), I went out last night and bought this.



To do this:



to get ready for this:

 
Well this took a lot longer than I anticipated, but I got it just about done. I had to do some trimming at the front of the wheel well where the spoiler wraps around. Then I mapped out and drilled my holes.

It’s a race car, so I may end up just using rivets to hold in in place. I was also thinking of just leaving the clecos in and calling my car Hellraiser.:p

 
Heads and intake arrived today.

 
I looked at the ScottRod stuff in regards to get one of his cowl covers but after thinking about the $128 cost plus shipping I didn’t pull the trigger. I did some measuring and stopped by a local dirt track chassis/body shop. The owner hooked me up with a .040ā€ 11ā€ x 30ā€ new piece of black coated aluminum cut from a partial scrap piece he had for $5!!!! I’ll cut n trim it to work. Need to mount a couple gauges on it which shouldn’t be a big deal.
 
Back
Top