Big Bore 427w

Is the light only for the return road? This might be a stupid suggestion but is there something you could just attach when it's necessary? Like a light bar on the roof with magnets?
 
Is the light only for the return road? This might be a stupid suggestion but is there something you could just attach when it's necessary? Like a light bar on the roof with magnets?
I honestly don’t even think I need lights, but I’m going to think on it some more.
 
Put your big power lifting ass on a diet and leave the car alone!

I don't like paying for anything 30 days in advance. If something goes sideways the credit card company will tell you to pound sand after 30 days.
 
Put your big power lifting ass on a diet and leave the car alone!

I don't like paying for anything 30 days in advance. If something goes sideways the credit card company will tell you to pound sand after 30 days.
No powerlifting here, I’m a bitch. Have only hit the weights sporadically since the move. Hoping to start back up again.

I am going to put a lexan windshield in, so that will save me a little. 🙂
 
No powerlifting here, I’m a bitch. Have only hit the weights sporadically since the move. Hoping to start back up again.

I am going to put a lexan windshield in, so that will save me a little. 🙂
Lol listening to you talk tells me that you are my brother from another mother. I went the exact same path you are heading down. In about two years you are going to be sick of spending thousands more to trim a couple tenths and faced with the dilemma that you are only going to get pennies on the dollar if you sell it . I wanted a street/strip pump gas car that I didn't have to fuck with or spend all of my spare time wrenching on. I ended up stripping all of the go fast parts off of my drag car and built a full interior street car. With new pistons and a cam I had a pump gas motor again. Now I run 7.50's and don't have to lift the hood. I couldn't be happier. I will see you when you get there!
 
Lol listening to you talk tells me that you are my brother from another mother. I went the exact same path you are heading down. In about two years you are going to be sick of spending thousands more to trim a couple tenths and faced with the dilemma that you are only going to get pennies on the dollar if you sell it . I wanted a street/strip pump gas car that I didn't have to fuck with or spend all of my spare time wrenching on. I ended up stripping all of the go fast parts off of my drag car and built a full interior street car. With new pistons and a cam I had a pump gas motor again. Now I run 7.50's and don't have to lift the hood. I couldn't be happier. I will see you when you get there!
I didn’t go into this thinking it was a good investment lol

I’m chasing a goal I had back in 2010. When I get this thing together it’s probably not even going to be fast by today’s standard, but I could give a fuck less. Time has been somewhat standing still for me in that my goal has never changed.

The only competition for me is with myself on whether or not I can make it happen. I think the only thing that can stop that now is our current worldly situation. Outside of that “Shit is going down”. 😂
 
Had to run around town this morning g to buy a cherry picker and an engine stand. I gave all of my shit away before I moved. The stabilizer brackets on the engine hoist weren’t even closed to lining up with the bolt bolts so I said fuck it and bolts Ed the bottom and welded the top.

Anyway, I got the engine pulled and on the stand. I’ll try to sell complete, if no one bites, I’ll start parting it out.

 
Engine is looking lonely and pitiful in the corner.



In the meantime, I’ve been ordering other goodies. Just bought a 9” front balance from Motor City Solutions and an Optic Armor windshield.

 
Well I got my rear wheels shipped out to get them modified for inner beadlocks. Got home and started taking out the struts and K-member. I wasn’t happy with the PA Racing K-member at all. I had to modify it while it was in the car because the engine was sitting in it way crooked. Tig welding tubes on your back while the engine is hanging was nerve racking. It wasn’t too bad after I modified it, but enough to make me want to swap it.

I thought about doing a motor plate, but didn’t want to worry about reconfiguring all of my accessories.

Anyway, I have a new UPR K-member and A-arms going in. Another company that gave me a military discount.

 
Last edited:
UPR k-member is installed and so are the Viking struts/coil over kit. That brown haze on the strut body is anti-seize.

Just as an FYI there was virtually no difference in weight between the UPRand PA k-members/a-arms.

PA - 31.5lbs
UPR - 31.3lbs

 
Moving along. I might stop there for today. Once I pull the vacuum pump mandrel and crank pulley I’ll start disconnecting the starter and tq converter. Almost ready to pull it, but I sold my cherry picker before I moved. I was thinking about buying the harbor freight gantry, but don’t know if I have the room for it. 🤔

Gantry doesn't take any room to store. You just need height. Mine sits against the wall. I'll snap a pic next time I'm out there.
 
Gantry doesn't take any room to store. You just need height. Mine sits against the wall. I'll snap a pic next time I'm out there.
I decided against the gantry because looking at the reviews alot of people said that the cable snapped as soon as they tried to adjust height. I didn’t want to spend the money for something I’m going to have to fix on day 1. I ended up buying a cherry picker and engine stand already.
 
I decided against the gantry because looking at the reviews alot of people said that the cable snapped as soon as they tried to adjust height. I didn’t want to spend the money for something I’m going to have to fix on day 1. I ended up buying a cherry picker and engine stand already.
I've pulled engines, bodies, cabs. I've left it outside, I've not been friendly to it but I've not had a cable break. Other than being inconvenient though it wouldn't be the end of the world. They are only used to raise and lower it. All the lifting is when it's locked in place.
 
I've pulled engines, bodies, cabs. I've left it outside, I've not been friendly to it but I've not had a cable break. Other than being inconvenient though it wouldn't be the end of the world. They are only used to raise and lower it. All the lifting is when it's locked in place.
I get that. I am very limited on space. The other thing is $1000 vs $220
 
Back
Top