Big Bore 427w

I'll try to get a picture of mine. Made a nice arc with a sharpie then got busy with the Dremel, came out fine!
I run a 29.5 x 10 (maybe 10.5) but it is actually about a 31" tall tire, cheater. :)
 
I did not cut it the body was done when I got it.
Pretty big but looks factory to the untrained non fox body eye. I’ve had 32x14, 33x10.5w both on 15x15 wheels. Can probably fit 5to6” more width & 3to4” more height tires.
I won't need to go nearly as big. Only need room for a 29.5-30" tire. Anything bigger and my non-power adder car might not be able to push them.
 
6.0 index lights out14. No he drilled me on the tree. I caught him & hit the brakes too hard. 6.025 to a 6.03.
 
I'll try to get a picture of mine. Made a nice arc with a sharpie then got busy with the Dremel, came out fine!
I run a 29.5 x 10 (maybe 10.5) but it is actually about a 31" tall tire, cheater. :)
Can't really do that on a foxbody. The way the body molding is, it would look ridiculous.
 
All of my moldings were modified & look factory.
 
6.0 index lights out14. No he drilled me on the tree. I caught him & hit the brakes too hard. 6.025 to a 6.03.
Do you have anyone to set up the front suspension? I replaced just about every part up front and would like to get it all dialed in. Can't find a shop nearby to do it. I talked to Straightline Performance yesterday out of New Lennox. They seem to be a decent shop, but if you have someone please let me know.
 
I'm no body man but I don't think it came out bad.

KPNnkZd.jpg


lVdZ1rh.jpg


I have a friend that went in the 7's on 28x10's with a BIG turbo!
A lot of these guys run the Drag Radials, no growth.
 
Ok, I finished up the wheel openings last night. They didn’t come out as good as I had hoped, but they should give me the clearance I need. I can always do it again with some patch panels down the road.



Woke up early this morning and pulled the rear bumper cover in preparation for this wild rides parachute mount. I doubt that it will be needed anytime soon, but I wanted to install it while the car is down and the car is semi torn apart.

I will post picks installed tonight when I finish up with work.

 
I don’t particularly like working from home, but it has its perks. Had some down time and ran out to install the parachute mount.

My wife was busting my balls and said that she doesn’t want to hear how hard I’m working. 😂

I’ll get this all buttoned up tonight after drilling a hole in the bumper cover.

 
All that's really left is, install steering shaft and new carb when it arrives. Button up rear bumper cover and install optic armor windshield. Alignment and then track for testing.
 
At least you did yours correctly! I made my own parachute mount, came out fine, never fell off after going 150+. :)
But......... I should have put those small tubes on it like yours has for the wing supports. My rods go down to a urethane cover, nothing under it. I always wonder how much they press down, but I don't go fast so it probably doesn't matter. Whing is not bent and it's been on there over 10 years.
 
I didn't read goodly..

Did the other blow hard take his carb back?
 
Back
Top