427 SBF

[89 Fox 427]

I have .350 clearance from pan to pickup without a gasket

 

[BOSS#1540]

I have .350 clearance from pan to pickup without a gasket

Perfect.
Now replace the square pickup with a round one

 

[BOSS#1540]

Never mind I ordered the fuckin thing

Was I right ?

 

[89 Fox 427]

Perfect.
Now replace the square pickup with a round one

It's round on the inside.

Just like thetipofmuhpenis

 

[Patriot Racer]

Did they put the oil pump on, or did you?
Just wanted to make sure the pump shaft was installed.

 

[89 Fox 427]

Did they put the oil pump on, or did you?
Just wanted to make sure the pump shaft was installed.

Listen asshole.

I forgot it and as soon as the torque wrench beeped on the second bolt there was a loud FUCK that echoed through the garage

 

[Mike Beck]

Here is the picture of the locks I tried to send ya.

The lock on the left is +.050. The other one is standard. They are both bead-lock style, not what you are using. Yours is square.

 

[89 Fox 427]

I'm going to say these are 7 degree locks

 

[Steve439]

I have trouble telling them apart, especially the Super 7s so I bought a tool.

https://www.compcams.com/retainer-degree-gauge-tool.html

 

[89 Fox 427]

I have trouble telling them apart, especially the Super 7s so I bought a tool.

https://www.compcams.com/retainer-degree-gauge-tool.html

OH COME THE FUCK ON ANOTHER FUCKIN TOOL

 

[Steve439]

He who dies with the most tools wins.

 

[89 Fox 427]

For the sake of @Steve439

 

[Steve439]

Damn, you done good!

 

[Steve439]

Have you run your numbers in a DCR calculator?
Professionals seem to laugh at DCR but I like it...

 

[Mark D.]

View attachment 29293

I see the problem now,that's a bottle of water for refreshment on the bench.

 

[Mike Beck]

I have trouble telling them apart, especially the Super 7s so I bought a tool.

https://www.compcams.com/retainer-degree-gauge-tool.html

I guess I need one, just because!

 

[Mike Beck]

OH COME THE FUCK ON ANOTHER FUCKIN TOOL

Booooooo........... I LOVE when there is a damn good reason to buy another tool!

I just bought a full set of wheel dollies from Horrible Freight. Man, these things are killer! Weren't cheap, but they work perfect! Slide the legs to straddle the tire, flick a lever, start pumping on the arm with your foot. Legs come together and lift the wire up off the ground. I can push a car around by myself now with no effort! Sometimes you can get good stuff from that place.

 

[89 Fox 427]

Have you run your numbers in a DCR calculator?
Professionals seem to laugh at DCR but I like it...

8.19:1

 

[Steve439]

Booooooo........... I LOVE when there is a damn good reason to buy another tool!

I just bought a full set of wheel dollies from Horrible Freight. Man, these things are killer! Weren't cheap, but they work perfect! Slide the legs to straddle the tire, flick a lever, start pumping on the arm with your foot. Legs come together and lift the wire up off the ground. I can push a car around by myself now with no effort! Sometimes you can get good stuff from that place.

I've been eyeing those!

They definitely ain't cheap!

 

[ratssass]

Booooooo........... I LOVE when there is a damn good reason to buy another tool!

I can push a car around by myself now with no effort! Sometimes you can get good stuff from that place.

Another great tool for the discriminating Mustang owner....