427 SBF

Why don't you windsor guys grab up a set of nascar D3's and intake and make some serious power. I mean yeah, they're basically and updated Cleveland head but you don't have to admit it to anyone 🤷‍♂️🤭🤫
 
My 1st 358c cost me $2900 and ran a 12.5 in a bone stock 83 hatchback with the heavy spring tab bent and spinning through 1st gear. Didn't matter if I ran a 1.5 second 60' or a 2.2, it would still run 12.5
Guess what, it had a dual plane intake on it 😉
I understand you wimpy windsor gals hating on the Cleveland but you really should show some respect 😏
 
BOSS#1540 said:
My 1st 358c cost me $2900 and ran a 12.5 in a bone stock 83 hatchback with the heavy spring tab bent and spinning through 1st gear. Didn't matter if I ran a 1.5 second 60' or a 2.2, it would still run 12.5
Guess what, it had a dual plane intake on it 😉
I understand you wimpy windsor gals hating on the Cleveland but you really should show some respect 😏
Click to expand...
Actually, nobody was hating on the Cleveland. Quite the opposite. YOU started hating on the Windsor and are bringing that thread from YB back to life here. It’s the same mentality of all the political threads with all the fanaticals.

It’s pretty weird 😂
 
Patriot Racer said:
Where are the videos and time slips of this Cleveland rocket?
Click to expand...
Told you already, it only ran 11.7 but at 125 mph, leaving at an idle. 1st day at track, no tuning, rev limiter set at 7000, hitting it in top of each gear without knowing. Want more excuses? But that was my old unported 600hp version which is getting freshened for my 69 sportsroof resto.
My XE should be closer to 800 hp. With a 1975 Ford block, and 1982 Ford heads and intake.
Halstead made 774hp @ 13:1 and 740ish lift, in a 2 bolt block. I'm 14.5:1 with 837 lift. Same heads and intake as tim, ported by Darin Morgan. He ran a 9.32 on his 1st pass in a 3200 lb cougar.
If I made 750hp I would've been happy before everybody said you'll make 800 spinning it to 8600, 🤦‍♂️ bad as fox ffs


So mr lightweight, you had that all aftermarket windsore on the dyno yet ? 😆🤣😉
 
Patriot Racer said:
Actually, nobody was hating on the Cleveland. Quite the opposite. YOU started hating on the Windsor and are bringing that thread from YB back to life here. It’s the same mentality of all the political threads with all the fanaticals.

It’s pretty weird 😂
Click to expand...
Nope, yer wrong, i did NOT draw 1st blood.
Secondly I'm joking around but it obviously causes you some hurt, sorry, lol.
Go look at the Cleveland thread and show me what mentality it is you think I have. All I ever said was that it was a low cost engine capable of 450-500 hp with basically a cam change. As far as pissing contests with the chevy peckerheads, yeah, I offered anyone the same challenge. 1970's heads and intake, 400 cubes n/a, anything else goes. No takers other than big time.


Yer weird 🙄
 
Mark D. said:
Thought I was in a build thread but had to look twice since I thought I was in TOBT. This isn’t YB.
Click to expand...
Sorry to have upset you and others so much. Thought it was obvious joking around but some are more sensitive than others. Just sitting in the hospital with my wife after one hell of a scare and a 6 hour surgery. Everything went good and no cancer so I was in a pretty good mood and messing with patriot, who started the Cleveland shit today so..... go fuck yourself
 
89 Fox 427 said:
Can you two love birds use something than a build thread for this. Damn 26 pages and still not running
Click to expand...
And that is ripe, lol, it was you that started the Cleveland shit with me shortly after I joined. Which is fine with me but.....

I've tried to help you where possible but I'll step away now
 
BOSS#1540 said:
Sorry to have upset you and others so much. Thought it was obvious joking around but some are more sensitive than others. Just sitting in the hospital with my wife after one hell of a scare and a 6 hour surgery. Everything went good and no cancer so I was in a pretty good mood and messing with patriot, who started the Cleveland shit today so..... go fuck yourself
Click to expand...
Didn't upset me at all,I am glad to hear that your wife is doing well and received a good report,I hope she has a fast and complete recovery.
 
BOSS#1540 said:
Sorry to have upset you and others so much. Thought it was obvious joking around but some are more sensitive than others. Just sitting in the hospital with my wife after one hell of a scare and a 6 hour surgery. Everything went good and no cancer so I was in a pretty good mood and messing with patriot, who started the Cleveland shit today so..... go fuck yourself
Click to expand...
Sorry to hear about your wife, hope all is well. I fought the Big C years ago, know all too much about it.

But Furds, I don't know much. I have a friend that raced with me for years, always ran a SBF with something that had heads that are supposed to be way too big, 4V heads maybe? This is an old dude, far older than me, loves his early Mustangs, hates Deep Stagers (ME!) we are CHEATERS and make the track shorter! I always loved to race him and beat him. :) Then we would all go out to dinner afterwards.

Good friendly fun buddy, don't take any of this shit too seriously, we phuck around with each other to have fun. Life is short, and shit happens, take care of the wife then come back for some more bickering! As you can see we LOVE to bust on @89 Fox 427, he will say Boooooo....... :)
 
You must log in or register to reply here.
Back
Top