427 SBF

[89 Fox 427]

Henry has flat heads making more power than yer windsor crap

I blame the cam guy

 

[BOSS#1540]

OCD obviously.

Obsessive Cleveland Disorder

 

[BOSS#1540]

I blame the cam guy

Probably wrong firing order

 

[Steve439]

Engine Masters was building a Clevor earlier today.
I DVR the episodes, it looked pretty good.

 

[Patriot Racer]

You can't just decide you've struck a nerve

Why do you think I've ran Clevelands my whole life

I was dead set on building a Clevor back in the day, but life happened and I was out of this game for 10 years. The fire to do it went away. I did try to reach out to inquire about parts after Covid, but the Aussies weren’t answering my emails. Decided to keep it simple.

But there is a guy that goes by Doc’s Notch on corral and his shit flies. I know he was on YB too.

427 Windsor - 765 RWHP

Not sure how many view Farsebook but this is one stout "pump gas" Drag Week build. https://www.facebook.com/jeff.sias/videos/10157704287379826/

www.corral.net

 

[BOSS#1540]

Hey fox, before you list yer other set of new heads to buy Cleveland hi ports or D3 or Higgins heads remember you will need new pistons also

 

[BOSS#1540]

I was dead set on building a Clevor back in the day, but life happened and I was out of this game for 10 years. The fire to do it went away. I did try to reach out to inquire about parts after Covid, but the Aussies weren’t answering my emails. Decided to keep it simple.

But there is a guy that goes by Doc’s Notch on corral and his shit flies. I know he was on YB too.

427 Windsor - 765 RWHP

Not sure how many view Farsebook but this is one stout "pump gas" Drag Week build. https://www.facebook.com/jeff.sias/videos/10157704287379826/

www.corral.net

Yeah, I talked with him on YB, he was doing drag weeks iirc

 

[89 Fox 427]

Hey fox, before you list yer other set of new heads to buy Cleveland hi ports or D3 or Higgins heads remember you will need new pistons also

If this one doesn't work I'll be trading the car and engine for an iroc or regal with an LS

 

[BOSS#1540]

Engine Masters was building a Clevor earlier today.
I DVR the episodes, it looked pretty good.

Even better if you replace the or with eland

 

[Steve439]

...or even better if you build a Windsor and put some modern heads on it...

 

[BOSS#1540]

...or even better if you build a Windsor and put some modern heads on it...

Nah, lots of modern heads for the Cleveland and no need for 12" steel bolts through 8" of aluminum timing chain cover and water pump 9.2 deck with a dry intake.
With A3's from 82 flowing 400 I have no need for "modern"

 

[BOSS#1540]

Don’t you have a vette ?

 

[Steve439]

Don’t you have a vette ?

Yes, but a 302 height Windsor in something like a 240Z is on my bucket list.

 

[BOSS#1540]

Yes, but a 302 height Windsor in something like a 240Z is on my bucket list.

8.2 deck 402 with ford D3 top end or sc2 or Higgins heads

 

[Steve439]

8.2 deck 402 with ford D3 top end or sc2 or Higgins heads

That would break the fuck out of a 240Z driveline.

289 with AFR 185 heads and a big cam to keep the torque down and we're in the ballpark...

 

[Briansshop]

Ford guys ragging on Ford guys. That's funny.

 

[BOSS#1540]

That would break the fuck out of a 240Z driveline.

289 with AFR 185 heads and a big cam to keep the torque down and we're in the ballpark...

that'll just make it rpm higher, lol

My brother has afr 185's on his 306, emissions legal cam, in 91 mustang loaded with AC and aod, runs 12.1

 

[89 Fox 427]

Ford guys ragging on Ford guys. That's funny.

Turns out Cleveland guys are weird

 

[BOSS#1540]

Ford guys ragging on Ford guys. That's funny.

Cleveland guy ragging on clevor/windsor gals

 

[Steve439]

that'll just make it rpm higher, lol

Precisely!